SVEN Smart 1000
SVEN Smart 1000
Short Item:
- Sine output voltage both in on-line and off-line mode
- Wide range of input voltage
- High efficiency
- Built-in surge protector
- Sine output voltage both in on-line and off-line mode
- Wide range of input voltage
- High efficiency
- Built-in surge protector
- LCD display
- Indication of parameters and basic operation modes
- Sound alarm for off-line operation, overload and critical discharge level of storage batteries
- USB and RJ-11/RJ-45 communication ports
- Cold Start function in off-line mode
- Automatic electricity delivery at power supply renewal
- Short circuit and overload protection, pulse and high-frequency disturbance protection
- Modem/telephone circuit protection
Maximum load, VA/W | 1000/600 |
Input voltage level, V | 165 – 275 |
Output voltage level, V |
220 ±10 % (on-line) 220 ± 5 % (via converter) |
Output voltage waveform | sine wave (on-line and off-line) |
Frequency, Hz | 50 |
Communication port | USB, RJ-11/RJ-45 |
Input terminals | CEE 7/4 |
Output sockets | 2 × CEE 7/4 |
Protection |
short circuit and overload modem/telephone circuit |
Accumulator type | maintenance-free sealed lead-acid batteries (consumables) |
Accumulators capacity | 12 V 7 А•h (2 pcs) |
Typical switching time, ms | > 8 |
Batteries operation time, min | 3-10 min. (depending on the load) |
Indicators | variables and basic operation modes |
Processor | RISC-microprocessor based |
Controlled variable | current input and output voltage, frequency, battery charge level, load condition |
Environment operation conditions | <5000 m above sea level, 0-50 °C, moisture 0 - 90% without condensation |
Supported interfaces | intelligent software support of Windows 98/Mе/NT/2000/XP/2003/Vista, Linux, FreeBSD, Novell Netware |
Certificates | UL. cUL, FCC, [CE,TUV] РосТест |
Floating time | 4 hours (up to >85 %), 10 hours max (up to >90 %) |
Dimensions (W × H × D), mm | 145 × 245 × 355 |
Weight, kg | 12 |
Life time | 5 years |
SVEN SMART 1000/1500 line-interactive uninterruptible power supplies featuring sine output voltage are ideal equipment for protecting PCs and peripherals: monitors, modems, etc.
In case of electricity failure, the UPS continues supplying power to the consuming devices using the energy of the integrated storage batteries. The built-in AVR provides proper power supply to the load at over-/undervoltage without entering the off-line mode.
The UPS is designed for computer equipment only. Don't connect household heating appliances, other high-power electric devices and office equipment (room heaters, electric kettles, laser printers, air conditioners, etc.). These appliances increase power consumption considerably, and this can cause the UPS overload and breakdown.
Locate the UPS indoors only, in rooms with controlled air temperature and humidity. During operation, the housing of the device can heat up to 50°C, which is absolutely normal.