SVEN Pоwer Pro+ 1000

Short product description:

Digital microprocessor control
High efficiency
Wide range of auto voltage regulation (АVR)
Built-in surge protector
USB communication port
Impulse suppression connector for network equipment protection (modem, telephone, fax)
Cold Start function at DC power supply
Automatic electricity delivery mode at power supply renewal
Passive ventilation allows noiseless operation
Deep battery discharge prevention mode
Short-circuit and overload protection

Maximum load, VA/W	1000/600
Input voltage level, V	172–272
Output voltage level, V	198–242 (on-line), 220 ± 10 % (off-line)
Output voltage waveform	Sine wave (on-line), step-approximated sine wave (off-line)
Frequency, Hz	50 (determined automatically)
Communication port	USB
Input terminals	IEC 320 (plug)
Output sockets	IEC 320 from the inverter (6 pieces)
Protection	form high input current, short circuit, overload, lightning stroke, voltage surges, falls, brownouts, blackouts. Modem / telephone circuit protection
Alarm signals	beeps ≤ 30 dB at a distance of 1 meter
Accumulator type	maintenance-free sealed lead-acid batteries (consumables)
Accumulators capacity	2 pieces - 12 V х 7 А h
Typical switching time, ms	4-8
Batteries operation time, min	4.1/11.3 (full load/half load)
Indicators	of on-line operation, battery operation, overload, battery fail
Processor	RISC-microprocessor based
Controlled variable	current input and output voltage, connected load level
Environment operation conditions	5000 m above sea level, 0–50 °C, moisture 0 - 90 % without condensation
Supported interfaces	intelligent software support of Win9X/Mе/NT/2000/XP/Vista
Certificates	UL. cUL, FCC, [CE,TUV] РосТест
Floating time	4 hours (up to >85 %), 10 hours max (up to >90 %)
Dimensions (W × H × D), mm	360 x 147 x 234
Weight, kg	10
Life time	5 years

No files attached

Item added