SVEN AVR-3000 LCD
SVEN AVR-3000 LCD
Short Item:
- Particular stabilization accuracy of input voltage
- Protection of devices-consumers against high/low input volta...
- Pause function for safe voltage supply at the power supply r...
- Input/output voltage digital indicator on the front panel
-
FEATURES
-
SPECIFICATIONS
-
DESCRIPTION
-
UNBOXING VIDEO
-
SUPPORT
- Particular stabilization accuracy of input voltage
- Protection of devices-consumers against high/low input voltage, short circuit, high-frequency and high-voltage interferences
- Pause function for safe voltage supply at the power supply renewal
- Input/output voltage digital indicator on the front panel
- Metal case
- Optimal solution for unstable power supply networks
| Type | relay |
| Maximum load, W | 2400 W |
| Input voltage level, V | 100 – 280 |
| Output voltage level, V | 220 ± 8 % |
| Frequency, Hz | 50 |
| Indicators | digital |
| Maximal interference current, A | 20 |
| Environment operation conditions |
operating temperature, °C - 0 ~ 40 operating humidity (without condensation), % – 10 ~ 90 |
| Dimensions (W × H × D), mm | 190 × 220 × 310 |
| Weight, kg | 8.8 |
| Life time | 5 years |
SVEN AVR-3000 LCD is designed to correct on-line power supply in conditions of low/high voltages. The wide range of input voltages from 100 V to 280 V enables the operation of the device in conditions of critical power supply state. The automatic voltage regulator is equipped with protection against short circuit, overload, overheating, overvoltage and undervoltage.
The Pause function (6 or 180 seconds – at option) makes it possible to connect devices-consumers safely to the power supply network at the moment of power supply renewal. The device is equipped with voltmeters, which display the input and output voltages. Due to its strong metal shockproof case the automatic voltage regulator can be also used in technical premises such as a garage, workshop or boiler house.
Note. Connection of SVEN AVR-3000 LCD model to standard mains sockets is prohibited! The AVR, as well as devices-consumers, are connected to the home power supply via terminals located on the rear panel under the removable cover with the use of appropriate cables (not included). AVR-3000 LCD automatic voltage regulator is to be connected by qualified electricians only.
